Camp puddle lights

I don’t generally like to leave the big bright porch light on, I know a lot of RV people do, but in the middle of nowhere when its really damn dark, that is too bright.

I wanted just a little light to help find the stairs, or just see a little light around the truck. So I came up with a plan. I bought some trailer marker lights, they are small LED’s 60 lumens ish, and mount in a 3/4″ hole. This was important, the flange around the bottom on the box is ~1 1/4″. My idea is to mount them to just shine on the ground around the bottom edge of the box. They are cheap and waterproof, can be found here.

LED Marker light

So the first step is to drill a hole, A step bit was used to do this.

3/4″ hole in the bottom flange

The lights work by removing the rubber, slipping that into the hole, then slipping the light into that. Its pretty secure in there actually.

Light in place

ThenĀ  the wiring. I had run a circuit to the passenger side tool box area when I was wiring the truck. I figured it would be handy for something in the future to have power out there. I used a light up push button switch, and an old antenna mount to hold it. It had to be spaced away from the corner a bit to clear the door for the propane access.

Switch in the tool box.

And the final result! Its awesome! Just a nice little bit of light around the truck. The camera makes it look a little brighter than it is, its just a subtle bit of light.

Puddle lights!

One Reply to “Camp puddle lights”

Comments are closed.